PAC INTERNATIONAL, LLC.


WORLD CLASS NOISE CONTROL SOLUTIONS. OVER SQ FT INSTALLED AND COUNTING.

Resilient Sound Isolation Clip-1 (RSIC-1®)

The RSIC-1® is designed for use with various framing designs and applications. The RSIC-1® decouples the Gypsum Board from the framing in wall and floor ceiling assemblies. The RSIC-1 has been acoustically tested, and adds 15 to 20 STC an IIC pts to your existing assemblies. Reducing the noise transfer by 75 to 100%.

When designed correctly into the wall or ceiling, there can be a substantial cost savings for the project.

Read more

Resilient Sound Isolation Clip (RSIC-1 Backer®)

Available Now

RSIC-1 when used with the RSIC-BB is the only complete isolation system that can support heavy loads such as cabinets, bookshelves, chalkboards, handrails, grab bars, and other heavy focused loads.

RSIC-1 + RSIC-BB = The Total Solution

When designed correctly into the wall or ceiling, there can be a substantial cost savings for the project.

Read more

Resilient Sound Isolation AdjustableDirect Mount
(RSIC-1 ADM® Shoot in)

The RSIC-1 ADM® clip is for use where an adjustable ceiling is needed to level a ceiling, or to create a dropped ceiling. The RSIC-1 ADM® clip can be used with or without the RSIC-Multi-Clip. The RSIC-Multi-Clip allows a shoot in option for the production minded builder and contractor. The RSIC-1 ADM is the only fully adjustable ceiling isolation hanger with a tested IIC of 87.

Read more

(RSIC-1 EXT04®) • NEW PRODUCT!

The RSIC-1 EXT04® is designed for use where an additional drop for HVAC, Plumbing, or Electrical Chases is needed. This clip gives you the flexibility to drop a ceiling as much as 4-1/2" from its original height. The RSIC-1 EXT04® is also used to level out uneven floor joists. This clip has proven to be very popular with the Home Theater industry. It creates a dropped ceiling, allowing an open chase for the new wires, all while retaining the superior acoustical performance of the RSIC clips.

Read more

1-1/2" Cold Rolled Channel (RSIC-1.5CRC™)

The RSIC-1.5CRC® is designed for use with any joist or concrete application where a dropped drywall ceiling is required. This assembly decouples the Gypsum Board from the floor structure above, giving the assembly enhanced acoustical performance, while allowing for a chase to hide mechanical ducting and plumbing lines. The RSIC-1.5CRC® Clip snaps onto cold rolled channel, allowing for all of the wires supporting the cold rolled channel to be hard connected to the ceiling above, including the vertical strut. The RSIC-1.5CRC® decouples the Gypsum Board below the cold rolled channel to ensure a complete decoupling of the Gypsum Board for optimum noise control.

Read more

Resilient Sound Isolation Clip (RSIC-SI-1®)
(Spring Isolator) NEW PRODUCT!

  • LOWEST LABOR COST
  • HIGH PERFORMANCE
  • WALLS
  • CEILINGS
  • WOOD
  • STEEL
  • CONDOS
  • TIME SHARE / FRACTIONAL OWNERSHIP
  • ASSISTED LIVING
  • APARTMENTS
  • HOTELS / MOTELS
  • SINGLE FAMILY
  • HOME THEATER
  • COMMERCIAL THEATER

Read more

Resilient Sound Isolation Clip-V (RSICV®)

The RSIC-V® is designed for use with various framing designs and applications. The RSIC-V® limits the connection points between the gypsum board and the structure in walls and ceilings. The RSIC-V® has been acoustically tested in wall systems and adds the assurance that your projects acoustical performance will improve drastically.

Read more

Resilient Sound Isolation DeCouple Clip (RSIC-DC04®)

The RSIC-DC04® and RSIC-DC04X2® are very versatile products. The most common use is the decoupling of wall systems. The design of the RSIC-DC04® can be used in new construction or retrofit. The RSIC-DC04X2® is twice as strong as the RSIC-DC04® for use when heavy items need to be acoustically decoupled for noise isolation. Below are some examples of the possible uses for the RSIC-DC04.

Read more

Resilient Sound Isolation Clip for (RSIC-U®)

The RSIC-U® is designed for use with various wall designs. The RSIC-U® decouples the wall framing from the floor and ceiling structure. The RSIC-U® system eliminates flanking paths normally caused by a wall directly connected the floor or ceiling. When combined with the RSIC-1 wall system the highest possible noise control can be achieved by preventing noise from passing through wall framing into the adjoining structure. The RSIC-U works directly with the RSIC-1 to achieve total decouple walls from the structure.

Read more

Resilient Sound Isolation Clip for (RSIC-Joist Isolator®)

The RSIC-Joist Isolator® is an isolation pad designed to support a floating floor frame from the existing floor system. The RSIC-Joist Isolator can be used over steel, wood or concrete floor systems. The RSIC-Joist Isolator when used with the RSIC-1 isolation clips provides superior noise control in theater and recording studio designs the walls need to be completely decoupled from the structure. The RSIC-Joist Isolator decouples the new floor from the structure and the RSIC-1 clips decouple the gypsum board from the wall, completely eliminating the structure borne path of noise and ensuring the very best in noise control.

Read more

RSIC Installation Videos



Soundproofing Rooms,
Click Here

White Paper / Media / News